Consolidated Jump To Dashboard Plugin

Comments

110 comments

  • Avatar
    Cassandra

    Hi 

    Does this work for scatter plot graphs?

  • Avatar
    Alon Ahronberg

    Hi Cassandra,

     

    Scatter chart is not supported by in this plugin.

    It's supports indicators, line / column / bar / Area / Pie charts & pivots.

     

     

    Alon

  • Avatar
    Cassandra

    Hi Alon 

    Is there a plan to have it support scatter plots in the future?  We were previously using the plugin provided at https://support.sisense.com/entries/60285470-Drill-to-Pop-Up-Dashboard and it worked with scatter plots. 

    Cassandra

  • Avatar
    Cassandra

    Hi Alon 

    I have realized that when you have a widget that has a filter the same as the dashboard filter the filter cancels itself out causing the pop up widget to filter incorrectly.  For example if you have completed date of "2015" selected as a widget filter  and completed date of "include all" as a dashboard filter when you select "Jump to dashboard" the widget will show data with any completed date rather than just data from 2015.

  • Avatar
    Alon Ahronberg

    Hi Cassandra,

    Thanks for letting us know - ill look into this.

    Regarding the scatter chart - currently, this plugin does not apply to it. Checking regarding the possibility to add it.

     

     

    Thanks

  • Avatar
    Michael Becker

    Hi Alon,

    can you change the icon indicating, that given widget is jump able, to NOT scale with the size of the widget. Right now it looks not too nice and in smaller indicators completely overlaps widget title. Thanks

    Michał

  • Avatar
    Alon Ahronberg

    Hi Michal,

     

    Can you please attach an print-screen, showing the overlap?

     

    Thanks

  • Avatar
    Michael Becker

    Hi Alon,

    here you go. I've just noticed it happens only in Design Mode(overlap), in Viewer Mode overlap does not happen, but icon is still stretched.




    1.png
  • Avatar
    Alon Ahronberg

    Thanks Michal !

    This issue was known and was mentioned in the introduction section.

    Please update your  image plugin , the old image plugin caused this smear.

    If this still persists, let me know.

     

    Thanks

  • Avatar
    Michael Becker

    Thanks Alon,

    I've missed that part in the description. Now it works nicely!

  • Avatar
    Ryan

    I'm having an issue where the right-click option shows sometimes, but not all. I have the same issue when editing the widget and attaching a _drill_ dashboard to it. Sometimes I have the option to assign it, others I don't. It seems that if I refresh the entire page it comes back, otherwise its hidden.

  • Avatar
    Alon Ahronberg

    Hi Ryan,

    On which widget does this happen ? please note that on indicators you should click on the number itself, clicking on the white space / title wont bring the option to jump.

    In addition, you can define for an indicator the option to "left click" it (as if it was a URL) in order to activate the jump, change the drillToDashboardNavigateType parameter in the indicator to 3.

    Let me know if that works out for you

    Alon

     

     

  • Avatar
    Ryan

    Alon,

    The issue for me was assigning the drill-through dashboard using the UI. Once I stopped using the UI to identify the dashboard and hard coded the ID, it worked perfectly.

  • Avatar
    Ryan

    It seems that disabling the drill-into (https://support.sisense.com/entries/60281100-Disable-Drill-into-) is negatively affecting this widget. When I include the disable-drill-into logic in a widget script it can (not always) hide the jump to dashboard option as well.

  • Avatar
    Sam Chick

    Is it possible to have different versions of the plugin's config file for different dashboards?

  • Avatar
    Ryan

    I'm having a few issues when end-users use this plug-in.

    • When they drill-through the widget is passing the filters as expected. What I didn't expect is that these filters are actually being saved to the drill-through dashboards base configuration. Is there any way to stop this?
    • There are times when the end-user clicks the drill-through that it opens 2+ additional tab copies.

     

    Typical Script being used

    prism.jumpToDashboard(widget, {
    drilledDashboardDisplayType:1,
    displayFilterPane:true,
    displayDashboardsPane:false,
    displayToolbarRow:false,
    displayHeaderRow:false,
    drillToDashboardMenuCaption:"Customer List",
    drillToDashboardRightMenuCaption:"Customer List",
    drillToDashboardNavigateType:3,
    dashboardId:"55f963d1b3ebf054040000d5"
    });

     

  • Avatar
    Lucas Soo Hoo

    Is there a way to jump to a dashboard that is built from a different elasticube?

  • Avatar
    Thomas

    Thanks for putting this together! 

    I was wondering if you had any ideas on how to implement multiple drill through's for one widget? On the same widget, one column would drill through to one dashboard while another column would drill through to a different dashboard. Any ideas on how to accomplish this? 

  • Avatar
    Alon Ahronberg

    Hi All,

     

    Please see my comments

     

    Cassandra - The plugin now supports the Scatter chart

    Ryan -

    • Few plugins might collide, however in our new Sisense version you can disable drilling without using a script (out of the box ability).
    • There is no way to avoid that, filters are being added to the target dashboard, you may use one dashboard as target dashboard, and the same one as regular dashboard to regularly access to.
    • Can you further explain ? does it happen on a specific widget type ? is it something you can recreate ?

    Sam  - Not currently

    Lucas -  No, only for dashboard made from the same cube

    Thomas - Currently this ability is not supported, hope we can add it in the future

     

     

    Thanks

     

  • Avatar
    Malinda Jepsen

    I renamed a dashboard and after doing so, end users see the old dashboard name in their "Jump To" right click menu.  As a designer, I see the new name (see attached Designer and Viewer screen captures).




    JumpToDashboardDesigner.PNG
    JumpToDashboardViewer.PNG
  • Avatar
    Mark

    can you explain more what it actually means in the target dashboard (to the user) when I use the "excludeFilterDims" parameter with a table.column name?  I am not seeing any effect in the target dashboard, so I am wondering if I don't understand what it is really doing.

    thanks

  • Avatar
    Ilan Shichor

    Hi Mark, can you create a support ticket and add some screenshots?

    Thanks!

  • Avatar
    Mark

    I'd be happy to, but I want to make sure what it is "supposed" to be doing is what I want.  If I use that parameter, what does "excluding the dimension filter from the target dashboard" actually mean once I get there?  Are any filter values from my source dashboard/widget ignored?  or does it prohibit the user from changing the filter value? or something else?

  • Avatar
    Michael Becker

    Hi Mark,

    it should not carry any selections made in source dashboard on columns specified in this parameter, to target dashboard. If filter Pane is enabled in target dashboard and that column is present there as a filter, users still can chnage it manually.

     

  • Avatar
    Mark

    ok it sounds like the intended behavior is what I am trying for, so I'll try to debug a little more and enter a support issue if I find there is a real issue for me.  appreciate all of your speedy responses...

  • Avatar
    Holger

    Is there a combination of settings in 'config.js' allowing me to

    - left click an indicator

    - right click a pivot or a graph

    to jump into a drill down dashboard? Currently it's more like an either-or-thing.

  • Avatar
    Michael Becker

    Hi Holger,

    You can change that setting per widget with script : prism.jumpToDashboard(widget, { <parameter> :<Value>,<parameter> :<Value>,<parameter> :<Value>}); SImply use this with different settings for different widgets.

    Regards,

    Michał

  • Avatar
    Holger

    Good point , that's something I'll try. Even though this can mean some work if you have a lot of dashboards and might make things somewhat harder to maintain - but anyway, it does indeed sound like a possibility. Thanks a lot.

  • Avatar
    Ryan

    I'm having an issue when trying to pass a date parameter to a drill-through dashboard. I pasted the script below. The plugin is passing every filter except for [Results.START_DT]. Any ideas?

    Script

    prism.jumpToDashboard(widget, {
    drilledDashboardDisplayType:1,
    displayFilterPane:true,
    displayDashboardsPane:false,
    displayToolbarRow:false,
    displayHeaderRow:false,
    drillToDashboardMenuCaption:"See Opty Detail",
    drillToDashboardRightMenuCaption:"See Opty Detail",
    drillToDashboardNavigateType:3,
    includeFilterDims : "[Organization.REGION_NM],[Organization.AREA_NM],[Organization.FACILITY_NM],[Results.GOAL_TYPE_NM],[Results.START_DT],[Results.WON_FLG]",
    dashboardId: '56a279f237c5e2601e000008'
    });

  • Avatar
    Andrew Block

    I ran into this recently so let me know if you have already tried this. Go into Developer Tools (F12) if you are on Chrome > Next go to the Network and click CRTL + R to record > Next  go into the Preview tab and look for the JAQL statements that contains your time dimension > Once you have found your value open up the metadata drop down and it should give you the exact phrase to use. For example in my screen shot it would be "[DimTime.DateforG/L (Calendar)]" which is weird because it does not follow the same structure as other dimensions. Hopefully this helps

    -Andrew

     

     




    Capture.PNG

Please sign in to leave a comment.